Why alternating current is most suitable for resistance welding

Asked by admin @ 20/08/2021 in Physics viewed by 355 People

Why alternating current is most suitable for resistance welding?

Answered by admin @ 20/08/2021

Answer:

resistance welding is a thermo electric process used for joint two metallic parts.

Electricity is used to provide heat.

Now, we know that Alternating Current is a pulsatile current having sine or cosine functions.

So in each cycle, the current crosses zero mark. This provides a time to cool down the joined parts of the metal.

But if we use direct current, we get continuous supply of heat , which doesn't allow metal to cool and solidify.

That's the reason we use alternating current. Hope you will be able to understand.

What is the difference between direct current and alternating current

Asked by admin @ 27/11/2021 in Physics viewed by 312 persons

What is the difference between alternating current and direct current? A. Alternating current regularly reverses direction. Direct current flows in only one direction. B. Alternating current flows in only one …

A direct current of 2a and an alternating current

Asked by admin @ 16/08/2021 in Physics viewed by 337 persons

What is the approximate peak value of an alternating current producing 4 times the heat produced per second by a steady current of 2A in a resistor 1) 2.8A 2) …

Find the time required for a 50hz alternating current

Asked by admin @ 13/08/2021 in Physics viewed by 273 persons

Find the time required for a 50 Hz alternating current to change its value from zero to the rms value.

Write two points of difference between direct and alternate current

Asked by admin @ 02/08/2021 in Physics viewed by 339 persons

Difference between alternating current and direct current

In resistance welding two electrodes are made of

Asked by admin @ 29/08/2021 in Physics viewed by 235 persons

In resistance welding, two electrodes are made of?

In electric resistance welding voltage required for heating is

Asked by admin @ 17/08/2021 in Physics viewed by 321 persons

In electric resistance welding voltage required for heating is

If the resistance in a circuit is increased the current

Asked by admin @ 03/08/2021 in Physics viewed by 270 persons

2.. If the resistance of an electric circuit is increased , what will happen to the current ,assuming the voltage remains the same?

A type of circuit where current by passes most resistance

Asked by admin @ 02/08/2021 in Science viewed by 274 persons

A type of circuit where current by passes most resistance and large dangerous current flow

What is the internal resistance of ideal current source

Asked by admin @ 20/08/2021 in Physics viewed by 364 persons

Why internal resistance of an ideal current source is infinite

Current divides itself through resistance connected in parallel by

Asked by admin @ 13/08/2021 in Physics viewed by 287 persons

Two resistors connected in parallel and a current is sent through the combination. The current divides itself, Score: 4 A)in the inverse ratio of resistance B)in the direct ratio of …

To get maximum current through a resistance of 2.5

Asked by admin @ 13/08/2021 in Physics viewed by 237 persons

To get maximum current through a resistance of 2.5Ω, one can use ‘m′ rows of cells, each containing ‘n′ cells connected in series. The internal resistance of each cell is …